pm7-series ? p42wg-xxxxe/z2:1(h35)lf ? single and d ual output ? 2?x1? - metal case specification can change without a notice ? we acce pt no liability for any inaccuracy or printing erro rs. page 1/4 p42wg-xxxxe/z2:1(h35)lf all specifications typical at ta=25c, nominal inpu t voltage and full load unless otherwise specified input specifications voltage range 2:1 wide input (see table) input filter capacitors input reflected ripple current1 35 ma pk-pk start up time (nom. vin and constant resistive load) 20ms, typ. output specifications voltage accuracy 1% short circuit protection indefinite (automatic recovery) over current protection 140% of max. iout line regulation 0.5% load regulation (10% - 100%) 0.5% ripple and noise (20mhz bandwidth) 100 mv pk-pk temperature coefficient 0.02% / c general specifications efficiency see table i/o isolation voltage (3 sec.) 1500 vdc (3000 vdc optional)* i/o isolation capacitance 500 pf, typ. i/o isolation resistance 1000 m ohm switching frequency 200 khz, typ. humidity 95% rel h reliability calculated mtbf (mil-hdbk-217f) > 1.121 mhrs physical specifications case material nickel coated brass potting material epoxy (ul94v-0 rated) weight ~ 30g, typ. environment specifications operating temperature -40 to +85c (ambient) maximum case temperature 100c storage temperature -40 to +125c cooling free air convection rohs conform soldering 260c, max. (1.5mm from case 10s.) mainzer stra?e 151?153 d-55299 nackenheim tel. +49 6135 7026-0 fax: +49 6135 931070 www.peak-electronics.de peak@peak-electronics.de the pm7 series p42wg - xxxxe/z2:1 (h35) lf is a family of cost effective 10w, single & dual output dc-dc converters with a w ide input range of 2:1. these converters are encapsulated in nickel coated brass 2x1 case with high performance features: 1500vdc up to 3500vdc in put/output isolation voltage, continuous short circuit protection with a utomatic restart and tight line / load regulation, high efficiency operation a nd output voltage accuracy of 1% maximum. pm7-series 10 watt 2:1 wide input 2? x 1? case 1.5 - 3.5 kv dc i/o isolation regulated output single and dual output continuous short circuit prot. rev.03-2009
pm7-series ? p42wg-xxxxe/z2:1(h35)lf ? single and d ual output ? 2?x1? - metal case specification can change without a notice ? we acce pt no liability for any inaccuracy or printing erro rs. page 2/4 selection guide single output order # i n p u t v o l t a g e ( v d c ) i n p u t c u r r e n t n o l o a d ( m a ) i n p u t c u r r e n t f u l l l o a d ( m a ) o u t p u t v o l t a g e ( v d c ) o u t p u t c u r r e n t m i n . l o a d ( m a ) o u t p u t c u r r e n t f u l l l o a d ( m a ) e f f i c i e n c y ( % ) c a p a c i t o r l o a d ( u f ) 2 single output p42wg-123r3e2:1lf 9-18 30 705 3.3 200 2000 78 2200 p42wg-1205e2:1lf 9-18 30 1016 5 200 2000 82 2200 p42wg-127r2e2:1lf 9-18 30 1004 7.2 138 1388 83 1000 p42wg-1209e2:1lf 9-18 30 1004 9 111 1111 83 1000 p42wg-1212e2:1lf 9-18 30 992 12 83 833 84 680 p42wg-1215e2:1lf 9-18 30 992 15 66 666 84 470 p42wg-1218e2:1lf 9-18 30 980 18 55 555 85 470 p42wg-1224e2:1lf 9-18 30 980 24 41 416 85 330 p42wg-243r3e2:1lf 18-36 25 352 3.3 200 2000 78 2200 p42wg-2405e2:1lf 18-36 25 508 5 200 2000 82 2200 p42wg-247r2e2:1lf 18-36 25 502 7.2 138 1388 83 1000 p42wg-2409e2:1lf 18-36 25 496 9 111 1111 84 1000 p42wg-2412e2:1lf 18-36 25 496 12 83 833 84 680 p42wg-2415e2:1lf 18-36 25 490 15 66 666 85 470 p42wg-2418e2:1lf 18-36 25 490 18 55 555 85 470 p42wg-2424e2:1lf 18-36 25 484 24 41 416 86 330 p42wg-483r3e2:1lf 36-72 20 176 3.3 200 2000 78 2200 p42wg-4805e2:1lf 36-72 20 251 5 200 2000 83 2200 p42wg-487r2e2:1lf 36-72 20 251 7.2 138 1388 83 1000 p42wg-4809e2:1lf 36-72 20 248 9 111 1111 84 1000 p42wg-4812e2:1lf 36-72 20 248 12 83 833 84 680 p42wg-4815e2:1lf 36-72 20 248 15 66 666 84 470 p42wg-4818e2:1lf 36-72 20 245 18 55 555 85 470 p42wg-4824e2:1lf 36-72 20 245 24 41 416 86 330 if you need other specifications, please enquire. * for optional 3.5kv dc i/o isolation, please add ? h35? before lf! example: p42wg-2409e2:1h35 lf for 3.5kv notes:
pm7-series ? p42wg-xxxxe/z2:1(h35)lf ? single and d ual output ? 2?x1? - metal case specification can change without a notice ? we acce pt no liability for any inaccuracy or printing erro rs. page 3/4 selection guide dual output order # i n p u t v o l t a g e ( v d c ) i n p u t c u r r e n t n o l o a d ( m a ) i n p u t c u r r e n t f u l l l o a d ( m a ) o u t p u t v o l t a g e ( v d c ) o u t p u t c u r r e n t m i n . l o a d ( m a ) o u t p u t c u r r e n t f u l l l o a d ( m a ) e f f i c i e n c y ( % ) c a p a c i t o r l o a d ( u f ) 2 dual output p42wg-123r3z2:1lf 9-18 30 1068 3.3 100 1000 78 1000 p42wg-1205z2:1lf 9-18 30 1016 5 100 1000 82 1000 p42wg-127r2z2:1lf 9-18 30 1004 7.2 69 694 83 680 p42wg-1209z2:1lf 9-18 30 992 9 55 555 84 470 p42wg-1212z2:1lf 9-18 30 992 12 41 416 84 470 p42wg-1215z2:1lf 9-18 30 980 15 33 333 85 330 p42wg-1218z2:1lf 9-18 30 980 18 27 277 85 220 p42wg-1224z2:1lf 9-18 30 980 24 20 208 85 220 p42wg-243r3z2:1lf 18-36 25 352 3.3 100 1000 78 1000 p42wg-2405z2:1lf 18-36 25 508 5 100 1000 82 1000 p42wg-247r2z2:1lf 18-36 25 502 7.2 69 694 83 680 p42wg-2409z2:1lf 18-36 25 502 9 55 555 83 470 p42wg-2412z2:1lf 18-36 25 496 12 41 416 84 470 p42wg-2415z2:1lf 18-36 25 496 15 33 333 84 330 p42wg-2418z2:1lf 18-36 25 490 18 27 277 85 220 p42wg-2424z2:1lf 18-36 25 490 24 20 208 85 220 p42wg-483r3z2:1lf 36-72 20 176 3.3 100 1000 78 1000 p42wg-4805z2:1lf 36-72 20 254 5 100 1000 82 1000 p42wg-487r2z2:1lf 36-72 20 248 7.2 69 694 84 680 p42wg-4809z2:1lf 36-72 20 248 9 55 555 84 470 p42wg-4812z2:1lf 36-72 20 245 12 41 416 85 470 p42wg-4815z2:1lf 36-72 20 245 15 33 333 85 330 p42wg-4818z2:1lf 36-72 20 242 18 27 277 86 220 p42wg-4824z2:1lf 36-72 20 242 24 20 208 86 220 if you need other specifications, please enquire. * for optional 3.5kv dc i/o isolation, please add ? h35? before lf! example: p42wg-2409z2:1h35 lf for 3.5kv notes:
pm7-series ? p42wg-xxxxe/z2:1(h35)lf ? single and d ual output ? 2?x1? - metal case specification can change without a notice ? we acce pt no liability for any inaccuracy or printing erro rs. page 4/4 package / pinning / derating pe a k modelcode datecode 50.80 (2.00) 10.16 (0.40) 5.08 (0.20) min. bottom view 3 5 4 10.16 (0.40) 1 2 10.16 (0.40) 5.08 (0.20) 15.24 (0.60) 15.24 (0.60) 20.32 (0.80) 10.16 (0.40) 10.16 (0.40) 2.54 (0.10) 2.54 (0.10) 25.40 (1.00) vin: vout: iout: vin -vout com (if dual) +vout - + dia. 1.00 (0.04) all dimensions are typical in millimeters (inches). - pin diameter: 1.0 +/-0.05 (0.04 +/-0.002) - pin pitch tolerance: +/-0.35 (+/-0.014) - case tolerance +/-0.5 (+/-0.02) specification may change without notice. 2" x 1" C metal case # single dual 1 +vin +vin 2 - vin - vin 3 +vout +vout 4 omitted common 5 - vout - vout same pinning for 3.5 kv isolation pin connections app notes: 1 = measured input reflected ripple current with a simu lated source inductance of 12uh. 2 = tested by minimal vin and constant resistive load. - operation under no-load conditions will not damag e these devices, but they will not observe the list ed specifications. - suggest adding input external filter (c1 , c2 , l ) to meet conducted emissions (en 55022 class a). emc specifications radiated emissions en 55022 fcc 47cfr part 15/a class a class a esd iec 61000-4-2 perf. criteria b rs iec 61000-4-3 perf. criteria a
|
